sheets and composite laminates; in this way a new hybrid material is obtained: the FML (Fibre Metal Laminate). In the present paper, an analysis of the influence of both composite/metal interface and layer thickness on ILSS (InterLaminar Shear Strength) of a carbon fibre composite and aluminium FML is presented. In particular, two different interfaces were studied: one obtained with a structural adhesive and the other with the prepreg resin; as concerns the layer thickness, both one and two aluminium sheets were considered in laminate stacking, maintaining constant the metal/composite volume ratio. The produced laminates were tested following the short beam three-point bending standard, in such a manner the ILSS propert

Influence of structural characteristics on the interlaminar shear strength of CFRP/Al fibre metal laminates

C. Bellini
;
V. Di Cocco;F. Iacoviello;L. Sorrentino
2019

Abstract

sheets and composite laminates; in this way a new hybrid material is obtained: the FML (Fibre Metal Laminate). In the present paper, an analysis of the influence of both composite/metal interface and layer thickness on ILSS (InterLaminar Shear Strength) of a carbon fibre composite and aluminium FML is presented. In particular, two different interfaces were studied: one obtained with a structural adhesive and the other with the prepreg resin; as concerns the layer thickness, both one and two aluminium sheets were considered in laminate stacking, maintaining constant the metal/composite volume ratio. The produced laminates were tested following the short beam three-point bending standard, in such a manner the ILSS propert
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: http://hdl.handle.net/11580/75984
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 11
social impact