This paper discusses the seismic behavior of reinforced concrete (RC) bridge structures, focusing on the shear–flexure interaction phenomena. The assessment of reinforced concrete bridges under seismic action needs the ability to model the effective non-linear response in order to identify the relevant failure modes of the structure. Existing RC bridges have been conceived according to old engineering practices and codes, lacking the implementation of capacity design principles, and therefore can exhibit premature shear failures with a reduction of available strength and ductility. In particular, recent studies have shown that the shear strength can decrease with the increase of flexural damage after the development of plastic hinges and, in some cases, this can cause unexpected shear failures in the plastic branch with a consequent reduction of ductility. The aim of the research is to implement those phenomena in a finite-element analysis. The proposed model consists of a flexure fiber element coupled with a shear and a rotational slip spring. The model has been implemented in the OpenSEES framework and calibrated against experimental data, showing a good ability to capture the overall response.
Finite Element Analysis of Reinforced Concrete Bridge Piers including a Flexure-Shear Interaction Model
Alessandro Rasulo
;
2020-01-01
Abstract
This paper discusses the seismic behavior of reinforced concrete (RC) bridge structures, focusing on the shear–flexure interaction phenomena. The assessment of reinforced concrete bridges under seismic action needs the ability to model the effective non-linear response in order to identify the relevant failure modes of the structure. Existing RC bridges have been conceived according to old engineering practices and codes, lacking the implementation of capacity design principles, and therefore can exhibit premature shear failures with a reduction of available strength and ductility. In particular, recent studies have shown that the shear strength can decrease with the increase of flexural damage after the development of plastic hinges and, in some cases, this can cause unexpected shear failures in the plastic branch with a consequent reduction of ductility. The aim of the research is to implement those phenomena in a finite-element analysis. The proposed model consists of a flexure fiber element coupled with a shear and a rotational slip spring. The model has been implemented in the OpenSEES framework and calibrated against experimental data, showing a good ability to capture the overall response.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
