In the Dynamic Tensile Extrusion (DTE) test, the material is subjected to very large strain, high strain rate and elevated temperature. Numerical simulation, validated comparing with measurements obtained on soft-recovered extruded fragments, can be used to probe material response under such extreme conditions and to assess constitutive models. In this work, the results of a parametric investigation on the simulation of DTE test of annealed OFHC copper -at impact velocity ranging from 350 up to 420 m/s -using the modified Rusinek-Klepaczko model, are presented. Simulation of microstructure evolution was performed using the visco-plastic self consistent model (VPSC), providing, as input, the velocity gradient history obtained with FEM at selected locations along the axis of the fragment trapped in the extrusion die. Finally, results are compared with EBSD analysis.

Validating material modelling for OFHC copper using Dynamic Tensile Extrusion (DTE) test at different velocity impact

BONORA, Nicola;TESTA, Gabriel;RUGGIERO, Andrew;IANNITTI, Gianluca;
2017-01-01

Abstract

In the Dynamic Tensile Extrusion (DTE) test, the material is subjected to very large strain, high strain rate and elevated temperature. Numerical simulation, validated comparing with measurements obtained on soft-recovered extruded fragments, can be used to probe material response under such extreme conditions and to assess constitutive models. In this work, the results of a parametric investigation on the simulation of DTE test of annealed OFHC copper -at impact velocity ranging from 350 up to 420 m/s -using the modified Rusinek-Klepaczko model, are presented. Simulation of microstructure evolution was performed using the visco-plastic self consistent model (VPSC), providing, as input, the velocity gradient history obtained with FEM at selected locations along the axis of the fragment trapped in the extrusion die. Finally, results are compared with EBSD analysis.
2017
978-0-7354-1457-0
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11580/63068
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 0
social impact