Ultrafine particle generation through mechanical processes was not carefully deepened so far, even if it could be related to the human health-based researches. In particular, the evaluation of ultrafine particles produced in battlefield scenarios can be useful to quantify the exposure of soldiers to particles carrying toxic heavy metals. In the present work ultrafine particle generation during high-velocity impact of metal projectiles was deepened performing symmetrical high velocity Taylor impacts of copper cylinder tests (Rod-on-Rod tests) by means of a gas-gun facility. Particle number distributions and total concentrations were measured through one-second-time resolution instruments in a chamber where impact events at different velocities were performed. Particle number generation per impact was also evaluated. Particle concentrations in the 106 part. cm-3 range were measured corresponding to particle generations higher than 1012 particles per impact, then comparable to those typical of combustion sources. Particle number distribution showed a unimodal distribution with a 10 nm mode. Summarizing, the performed experimental campaign revealed an extremely high generation of ultrafine particles from mechanical processes.

Ultrafine particle generation by high-velocity impact of metal projectiles

STABILE, Luca;IANNITTI, Gianluca;VIGO, Paolo;RUGGIERO, Andrew;RUSSI, Aldo Giovanni Giuliano;BUONANNO, Giorgio
2014-01-01

Abstract

Ultrafine particle generation through mechanical processes was not carefully deepened so far, even if it could be related to the human health-based researches. In particular, the evaluation of ultrafine particles produced in battlefield scenarios can be useful to quantify the exposure of soldiers to particles carrying toxic heavy metals. In the present work ultrafine particle generation during high-velocity impact of metal projectiles was deepened performing symmetrical high velocity Taylor impacts of copper cylinder tests (Rod-on-Rod tests) by means of a gas-gun facility. Particle number distributions and total concentrations were measured through one-second-time resolution instruments in a chamber where impact events at different velocities were performed. Particle number generation per impact was also evaluated. Particle concentrations in the 106 part. cm-3 range were measured corresponding to particle generations higher than 1012 particles per impact, then comparable to those typical of combustion sources. Particle number distribution showed a unimodal distribution with a 10 nm mode. Summarizing, the performed experimental campaign revealed an extremely high generation of ultrafine particles from mechanical processes.
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11580/36478
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 1
social impact